GINKO LAB / RICOH GR
Film looks for
your RICOH GR
From the SD card, with the firmware untouched.
Works with GR III, GR IIIx, and GR IV, HDF models included. GR IV Monochrome works without film looks. Download GINKOLAB.zip and copy the files to your SD card.
△ Unofficial and experimental. GINKO LAB has not been tested on a camera.
Loading preview…
Install
Recipes
Turn on the recipes to include in your ZIP and keep the Recipes module enabled. On the camera, open ADJ → Recipes to apply a saved set.
Pro ColorBy Ritchie RoeschNegative FilmSAT +4HUE -2KEY +3CONTRAST +3CTR·H -2CTR·S +4SHARPNESS -1CLARITY -1
1986 NegativeBy Ritchie RoeschNegative FilmSAT +4HUE -2KEY -1CONTRAST +2CTR·H +2CTR·S -3SHARPNESS -1CLARITY -2
Leica LookBy Photo StuffStandardSAT +2KEY -2CONTRAST +1CTR·H +1CTR·S +1SHARPNESS +1SHADING -1CLARITY +2
Classic Chrome+By Luke TaylorPositive FilmHUE -2KEY +3CONTRAST +2CTR·H +1SHARPNESS -1SHADING +1CLARITY -1
Candy Color 400By Luke TaylorPositive FilmSAT +4HUE -2CONTRAST +4CTR·H +4CTR·S +4SHARPNESS +4SHADING +1CLARITY +4
Royal SupraBy Ritchie RoeschPositive FilmSAT +2HUE -4KEY +1CONTRAST +4CTR·H -4CTR·S -3SHARPNESS +1CLARITY +4
Mode Dial · Set on camera
Choose what each position should do to see its setup steps. Apply the choices on the camera.
Turn on a recipe above to see its setup steps here.
Saved web selections
Modules
Choose the modules to include in your ZIP.
Camera
Downloaded GINKOLAB.zip before?
Check the firmware version in the camera menu. On an older version, update the camera from Ricoh first.
Download
- Camera
- GR III / GR III HDF
- Firmware
- 2.10 / 2.20 / 2.21
One ZIP supports all firmware versions listed above for this camera.
The test ZIP includes the selected modules and the bundled LUTs. Test with a spare SD card.
GINKOLAB is experimental and has no warranty. If you continue, you accept the terms of use.
Install⌄
GINKOLAB / INSTALL GUIDE · คู่มือติดตั้งแพ็กเกจของร้าน
ชุดเต็มใช้ GINKOLAB ในเมนูกล้อง ตรวจรุ่นและเฟิร์มแวร์ก่อนติดตั้ง
- Turn the camera off.
- Open GINKOLAB.zip (some browsers unzip it for you). Copy the contents of
SD_ROOT, not the folder itself, to the card root. The card root then has theSCRIPTfolder. - Insert the card. First time only: hold MENU while you turn the camera on, then wait until it turns itself off. This step uses
00078350.588andDEVELOP.MOD. - Turn the camera on. GINKOLAB loads about 8 to 10 seconds after power-on. Then press ADJ while you shoot and select the GINKOLAB entry.
To load GINKOLAB sooner, try Fast start.
- Optional: delete
00078350.588andDEVELOP.MODfrom the card root. Updates do not need them.
Update⌄
- Turn the camera off.
- Delete the
SCRIPTfolder from the card. - Open the new GINKOLAB.zip. From
SD_ROOT, copy only theSCRIPTfolder to the card root. - Insert the card and turn the camera on. You do not need to hold MENU.
- Film looks already on the card stay. To hide one, turn it off in Options of Film Look in the GINKOLAB section of MENU.
Uninstall⌄
- Turn the camera off. Delete the
SCRIPTandGINKOLABfolders from the card.GINKOLABholds your GINKOLAB settings. - To turn SD scripts off too, download the files below. Copy the contents of
SD_ROOTto the card root. - Insert the card. Hold MENU while you turn the camera on, then wait until it turns itself off.
- Remove
00078350.588andDEVELOP.MODfrom the card root.
FAQ
GINKOLAB does not show up in ADJ.
GINKOLAB loads about 8 to 10 seconds after power-on. It takes longer on GR IV and on the first start after an install or update. Wait, then press ADJ while you shoot and select the GINKOLAB entry. The first time, SD scripts must be on: hold MENU while you turn the camera on. To load it sooner, try Fast start.
Why do my first photos after power-on have no film look?
Until GINKOLAB has loaded, the camera uses its own settings. Wait a few seconds after power-on, or try Fast start.
Does GINKOLAB change the camera firmware?
No. GINKOLAB loads from the SD card while the camera is on. Without the card, or after you uninstall GINKOLAB, the camera works as before. The SD script setting, which lets the camera run GINKOLAB from the card, stays on until you turn it off. Only the optional fast-boot firmware changes the firmware, and only if you install it.
Can GINKOLAB load faster?
Yes, with the optional fast-boot firmware. It needs a firmware update.
Does a film look change my Image Control settings?
No. While a film look is on, it replaces Image Control. Your Image Control settings come back when you turn the look off.
What happens when I format the card?
A format deletes GINKOLAB and its settings. Before a format, copy the GINKOLAB folder to a computer. After the format, install GINKOLAB again, then copy the GINKOLAB folder back to the card root.
Do I hold MENU at power-on again after an update or with another card?
No. You hold MENU only the first time, to turn on SD scripts. The setting stays on for every card.
Can I use my own LUT or Lightroom preset?
Yes. Select Import a LUT in Film Looks. For a Lightroom preset, the import window tells you how to turn it into a LUT image.
Can I use these looks in Lightroom?
Not directly: GINKOLAB does not make Lightroom presets. The looks come from open-source film LUTs. Film look licenses, at the bottom of the page, gives the source of each look.
Which cameras does GINKOLAB support?
GR III, GR IIIx, GR IV, their HDF models, and GR IV Monochrome without film looks, on the firmware versions in the camera list. Earlier GR models are not supported.
Which GINKOLAB version is on my card?
In the camera, open MENU. About GINKOLAB is at the end of the GINKOLAB section in the Customize tab.